Videos

Coming Soon!

Behind the Scenes Tour:

See what it takes to create a Titan Model Kit! Tour my workshop and see the various steps of design, mold machining, vacforming, and 3D printing.

How To Remove Vac Parts From Backing:

See a demonstration of best practices in removing vac parts from the sheet

How To Thin Trailing Edges:

As delivered, the trailing edges of the wings and tail parts are the thickness of the plastic sheet used to produce them. If left alone, assembling raw parts will result in a trailing edge that is too thick for scale. Using 220 grit sandpaper, thin all trailing edges from the .080” material thickness to approximately .010”.

How To Install Clear Vac Cockpit Windows:

See a demonstration of best practices to install clear vac cockpit windows

How to Install Angle Styrene:

¼” styrene angle strips are provided to add rigidity to the fuselage and to increase the area of the fuselage joint for glue-up. You may wish to add additional bracing or joint reinforcement using scrap styrene at your discretion.

How to Attach Resin Parts to Vac Parts:

Learn how to prepare the vac parts for the resin pieces, how to test-fit the parts, and how to glue resin parts to vac parts.

How to Install Wheel Wells:

Beginning with the release of the A380 kit, wheel wells are designed with a lip that fits into the wheel well cutouts to positively position the wheel well and provide a clean seam between the vac and resin part. Learn about this 'positive-position' design feature.